Articles:

Here are two of the most important:.

Use a soft, dry cloth to wipe down the inside to remove any loose debris.Do not use water for this.. You should also check the air outlet in the floorhead for any blockages or clogging.

Even a partial blockage here will reduce airflow, leading to reduced suction power..Step 5: Re-Fit The Brush Bar.The final step is to replace the brush bar inside the floorhead.

As we haven’t used any moisture to clean the brush bar or floorhead, this can be done immediately without needing to wait for it to dry.. Slide the brush bar into the floorhead.You’ll need to ensure that the bar is correctly aligned with the spindle on the other end of the floorhead.. Once re-fitted, use a coin to turn the lock back into the correct position.

And you’re done!.

The Vax Blade 4 is a cordless stick vacuum that’s at the lower end of the price spectrum.Unscrew each of these so that the old battery can be removed.

They are quite small, so make sure you don’t lose them!.Step 3: Remove The Old Battery.

Once the three screws have been removed, slide the old battery out of the vacuum cleaner..The old battery should be easy to remove, so check if the screws have been fully unscrewed if it’s stuck or not coming out.. Make sure you follow your local rules when disposing of the old battery.